Technical Parameter
1. Microprocessor based servo controlled temperature system
2. Control Modes: Air mode
3. Humidity is adjustable in two levels
4. Set temperature, air temperature, and heating power are displayed separately by LED
5. Self-testing function, various failure alarms by audible and visual
6. Alarm function: Power failure, Over temperature, Temperature deviation, Fan failure, Temperature sensor failure
7.>37° temperature set function
8. Triple protection for over temperature with separate cut off device, more safety system
9. The inclination of the infant bed is adjustable
10. Single wall hood,4 operating windows and 2 iris ports,3 infusion seals
11. Locking device for front door
12.RS232 connector, 1 tray
13. Power Supply: AC110/220V 60.50Hz
14. Power Input:650VA
15. Operating Condition: Environment temperature 20℃~30℃
Environment relative humidity 30%~75%
Environment air velocity of flow <0.3m/s
16. Air Temperature Control Range:25℃~37℃ 37.1℃~38℃
17. Temperature Fluctuation:±0.5℃
18. Uniformity Of Mattress Temperature:≤0.8℃
19.Warm-uptime（from 25℃）：<30min
20. Internal Noise Level:<55dB(A)
21. Infant Bed Tilt Angle:±12°
22.Mattress Size:65cm(L)*37cm(W)
23. Trough Capacity:1000mL
24. Air Filter:0.5μm
25. Optional Functions: BL-30D Upside phototherapy unit/BL-100D Downside phototherapy unit
